Optex Detectors Range - PIR, Dual-Technology and Photoelectric Beam Detectors for Indoor and Outdoor Security Installations NZ

Optex Detectors: PIR, Dual-Tech and Photoelectric Options for NZ Security Installations

Essential Security Supplies

Optex is a globally recognised manufacturer of passive infrared (PIR), dual-technology, and photoelectric detection equipment trusted by security installers across New Zealand. Their range spans compact indoor sensors through to long-range outdoor beam detectors, covering residential, commercial, and high-security industrial applications. This guide covers the full Optex detector range available from Essential Security Supplies NZ, including key specifications, detection technologies, and application guidance to help you select the right sensor for your project.

OPT-BXS-ST Optex Outdoor Boundary Detector with Quad PIR Sensors - Perimeter and boundary detection for commercial and residential security NZ ---

Understanding Optex Detection Technologies

Optex detectors are built around three core detection technologies, each suited to different environments and threat profiles. Passive infrared (PIR) sensors detect changes in infrared energy caused by a moving person - they are cost-effective, reliable, and widely used in both indoor and outdoor applications. Dual-technology (PIR + microwave) detectors require both technologies to trigger simultaneously, dramatically reducing false alarms in challenging environments such as industrial sites, areas with HVAC airflow, or locations exposed to direct sunlight. Photoelectric beam detectors use an active infrared beam between a transmitter and receiver - ideal for perimeter protection across driveways, gates, and open boundaries where a physical beam break is the most reliable detection method.

Across all three technologies, Optex incorporates their proprietary CORE Platform digital signal processing, Digital Quad Zone Logic (requiring 4+ detection zones to be crossed before triggering an alarm), and double conductive shielding to block RFI and visible light interference. These features combine to deliver high detection accuracy with low false alarm rates - a critical requirement for Grade 2 and Grade 3 compliant installations.

---

Optex Indoor PIR Detectors

Optex indoor PIR detectors are designed for residential and commercial intrusion detection, offering a range of coverage patterns, mounting options, and compliance grades to suit most panel configurations.

OPT-CX-702 Optex Passive Infrared Indoor Detector - Dual purpose wide-angle and long-range PIR for residential and commercial security NZ

OPT-CX-702 - Passive Infrared Indoor Detector

The CX-702 features a unique spherical lens design that allows the installer to switch between wide-angle and long-range detection patterns by simply rotating the lens - no additional hardware required. It includes multi-focus technology, double conductive shielding, temperature compensation, and sealed optics. The CX-702MKII variant adds a twin pyro element, doubling the detection zones for enhanced accuracy. View our product.

OPT-RXC-ST - Pet Friendly Passive Infrared Detector

Built on Optex's proven RX and CX series platform, the RXC-ST uses Digital Quad Zone Logic with 78 dense zones and advanced temperature compensation to maintain reliable detection even as ambient temperatures approach body temperature. Pet immunity is achieved through high-density zone coverage and digital target recognition, making it suitable for Grade 2 residential, commercial, and industrial applications. View our product.

OPT-RXC-ST Optex Pet Friendly Passive Infrared Detector - Digital Quad Zone Logic PIR for residential and commercial security NZ

OPT-FX-360 - 360° Ceiling Mount PIR Detector

The FX-360 is a compact ceiling-mount PIR providing a 12m diameter detection area, ideal for lobbies, open-plan offices, and retail spaces. It features a hard spherical lens for precise 360-degree coverage, false alarm protection, and a warm-up indicator. PD6662:2010 compliant at Grade 2. View our product.

OPT-SX-360Z - 360° Ceiling Mount PIR with Zoom Function

The SX-360Z extends the ceiling-mount PIR concept with a patented zoom system that maintains a consistent 18m (60ft) diameter detection area at any ceiling height from 2.4m to 5m (8 to 16ft). With 276 dense detection zones and no dead spots, it suits larger commercial spaces where ceiling heights vary. View our product.

OPT-APX-360 - 360° Ceiling Mount PIR Detector

The APX-360 is a 360-degree ceiling-mount PIR detector suited to commercial and retail environments requiring broad area coverage from a single mounting point. View our product.

OPT-VIBRO - PIR Shock and Vibration Detector

The VIBRO complements standard PIR motion detection by detecting vibration and shock on surfaces - useful for detecting forced entry through walls, windows, or doors before an intruder enters the detection zone. Detection ranges vary by substrate: up to 3.5m on wood, 3m on steel, 2.5m on brick, and 1.5m on concrete. Two sensitivity modes (HIGH/LOW) and a learn mode allow calibration to the specific installation environment. View our product.

OPT-VIBRO Optex PIR Shock and Vibration Detector - Front and rear view, indoor surface-mount shock sensor for security NZ ---

Optex Indoor Dual-Technology (PIR + Microwave) Detectors

Dual-technology detectors require both PIR and microwave channels to trigger simultaneously before generating an alarm. This makes them the preferred choice for high-risk or environmentally challenging indoor locations where false alarms from a single-technology sensor would be unacceptable.

OPT-FMX-DT-X5 - Combination PIR and Microwave Detector

The FMX-DT is an EN50131-2-2 compliant dual-tech detector covering 15m x 15m at 85 degrees wide, with 78 detection zones. It features Digital Quad Zone Logic, advanced temperature compensation, remote LED control, and a selectable plug-in end-of-line (EOL) unit for panel compatibility. Mounting height: 2.2m to 3.0m. Power: 9.5 to 16 VDC. Operating temperature: -20 to +45°C. Dimensions: 111.7mm x 61.4mm x 50.0mm. View our product.

OPT-RXC-DT-X5 - Combination PIR and Microwave Detector

The RXC-DT-X5 is an EN50131-2-4 compliant dual-tech detector built on the RX CORE platform with 78 dense zones, microwave area shaping technology, and a multi-angle bracket supporting ceiling and wall mounting (horizontally ±45 degrees, vertically 0 to 15 degrees downward). Tough MW module design ensures long-term stability of the microwave channel. View our product.

OPT-CDX-DAM-X5 - Grade 3 PIR and Microwave Combination Detector

The CDX series is Optex's highest-grade indoor detector range, designed for high-risk applications including banking, industrial, and government sites. EN50131-2-4 (Grade 3) compliant, it features 82 dense detection zones, active IR digital anti-masking (AIR technology), sharply-directed microwave technology to eliminate unwanted detection areas, and a plug-in EOL unit option. PIR coverage: 15m x 15m at 85 degrees wide. Power: 9 to 18 VDC. Operating temperature: -10 to +50°C. Dimensions: 140mm x 70mm x 52.3mm. View our product.

OPT-CDX-DAM-X5 Optex Grade 3 PIR Microwave Combination Detector - High-security indoor dual-tech detector for banking and industrial NZ ---

Optex Outdoor PIR Detectors

Optex outdoor PIR detectors are weatherproofed and engineered to handle the environmental variables that cause false alarms in standard indoor sensors - wind, rain, temperature swings, and small animals. IP ratings, SMDA logic, and pet immunity are key differentiators across this range.

OPT-LX-402 - Outdoor Passive Infrared Detector IP54

The LX-402 is a versatile outdoor PIR covering 12m x 15m in standard mode, with a selectable pet alley mode (mounted at 1.2m) that allows animals to pass underneath without triggering an alarm. Day/night functionality, double conductive shielding, three sensitivity levels, and IP54 weatherproofing make it a practical choice for residential and light commercial perimeter, garden, and driveway applications. View our product.

OPT-LX-402 Optex Outdoor Passive Infrared Detector IP54 - Pet alley mode PIR for residential perimeter and driveway security NZ

OPT-WXI-ST - 180° Panoramic Outdoor Detector IP55

The WXI-ST provides a 12m, 180-degree field of view with SMDA (Super Multi Dimension Analysis) digital logic for enhanced environmental adaptation. Two independent left and right detection areas make it ideal for triggering CCTV camera presets, allowing the camera to pan to the specific zone where motion was detected. Selectable pulse count reduces false alarms from environmental interference. View our product.

OPT-WXI-ST Optex 180 Degree Panoramic Outdoor Detector IP55 - SMDA logic PIR with independent left and right detection zones NZ

OPT-QXI-ST - Wide Angle Passive Infrared Outdoor Detector

The QXI-ST is a wide-angle outdoor PIR suited to broad perimeter coverage applications. View our product.

OPT-BXS-ST - Outdoor Boundary Detector with Quad PIR Sensors

The BXS-ST (BX Shield) is a curtain outdoor PIR with up to 12m detection range per side, featuring four PIR elements - two on each side. Each side operates completely independently, with adjustable detection distances (2.5m, 3.5m, 6m, 8.5m, or 12m) and sensitivity settings. The dual-beam design on each side (one pointing toward the floor, one pointing away) ensures small to medium animals are ignored while people are reliably detected. Easily connected to fixed dome CCTV cameras for visual alarm confirmation. View our product.

OPT-FTN-ST - Compact Outdoor Curtain PIR

The FTN-ST is a compact hardwired outdoor curtain PIR with switchable lenses providing either 2m or 5m short-range detection - ideal for protecting front doors, windows, and balconies. SMDA logic analyses every motion event before triggering an alarm, making environmental response 24 times more effective than conventional sensors. Pet immunity and double conductive shielding are included. View our product.

OPT-FTN-ST Optex Compact Outdoor Curtain PIR Detector - Short range wired curtain detector for doors, windows and balconies NZ ---

Optex Outdoor Dual-Technology (PIR + Microwave) Detectors

For outdoor environments where PIR alone is insufficient - high-traffic areas, locations with significant temperature variation, or sites requiring Grade 3 performance - Optex's outdoor dual-tech range adds microwave verification to eliminate false alarms without sacrificing detection reliability.

OPT-QXI-DT-X5 - Wide Angle PIR and Microwave Outdoor Detector

The QXI-DT-X5 combines wide-angle outdoor PIR coverage with 10.525 GHz microwave detection for dual-tech verification in broad perimeter applications. View our product.

OPT-VXI-DAM-X5 - Outdoor PIR and Microwave Detector

The VXI-DAM-X5 is an outdoor dual-tech detector operating at 10.525 GHz, combining PIR and microwave detection for high-reliability outdoor intrusion detection in commercial and industrial perimeter applications. View our product.

OPT-HX-40 - High Mount Outdoor PIR and Combination Detector

The HX-40 is designed for high-mount outdoor applications where standard mounting heights are not achievable, offering PIR or combination detection options to suit the installation environment. View our product.

---

Optex Photoelectric Beam Detectors

Photoelectric beam detectors use an active infrared beam between a transmitter and receiver unit. When the beam is broken, an alarm is triggered. This makes them ideal for perimeter protection across open boundaries - driveways, gates, rooflines, and garden perimeters - where a physical beam break is more reliable than PIR motion detection in open outdoor environments.

OPT-SL-200QN - Outdoor 60m Photoelectric Detector IP65

The SL-200QN provides up to 60m (200ft) outdoor detection range with quad beam detection to dramatically reduce false alarms from birds and falling leaves. A Sniper Viewfinder with x2 magnification and an alignment dial simplify installation and optical alignment. IP65 rated. Compatible with the BAU-4 beam alignment unit for single-technician alignment. Applications include perimeter, roof/ceiling, garden, and driveway. View our product.

OPT-SL-200QN Optex Outdoor 60m Photoelectric Beam Detector IP65 - Quad beam perimeter detector for driveways and gates NZ

OPT-SL-650QN - Outdoor 200m Photoelectric Detector IP65

The SL-650QN extends the SL series to 200m (650ft) outdoor detection range, making it suitable for large perimeter applications including industrial sites, warehouses, and open boundary protection. High-grade aspherical lenses, two easy-alignment tools, and IP65-rated UV-resistant polycarbonate housing with frost-prevention hoods ensure reliable long-term performance. Can be connected to an IP network via the optional PIE-1 IP/POE module. View our product.

OPT-SL-650QN Optex Outdoor 200m Photoelectric Beam Detector IP65 - Long-range perimeter beam detector for industrial and commercial security NZ ---

Product Specifications

Model Type Coverage / Range Detection Zones IP Rating Power Supply Operating Temp Compliance
OPT-CX-702 Indoor PIR Wide-angle or long-range (switchable) Multi-focus Indoor - - -
OPT-RXC-ST Indoor PIR (pet immune) Standard wall mount 78 zones Indoor - - Grade 2
OPT-FX-360 Ceiling PIR 360° 12m diameter - Indoor - - Grade 2 (PD6662:2010)
OPT-SX-360Z Ceiling PIR 360° (zoom) 18m (60ft) diameter, 2.4-5m height 276 zones Indoor - - -
OPT-VIBRO Shock/Vibration 1.5m (concrete) to 3.5m (wood) - Indoor - - -
OPT-FMX-DT-X5 Indoor PIR + MW 15m x 15m, 85° wide 78 zones Indoor 9.5-16 VDC -20 to +45°C (DT) / +50°C (ST) EN50131-2-2
OPT-RXC-DT-X5 Indoor PIR + MW Standard wall mount 78 zones Indoor - - EN50131-2-4
OPT-CDX-DAM-X5 Indoor PIR + MW (Grade 3) 15m x 15m, 85° wide 82 zones Indoor 9-18 VDC -10 to +50°C EN50131-2-4 Grade 3
OPT-LX-402 Outdoor PIR 12m x 15m (standard) / pet alley mode - IP54 - - -
OPT-WXI-ST Outdoor PIR 180° 12m, 180° - IP55 - - -
OPT-BXS-ST Outdoor Curtain PIR Up to 12m per side 4 PIR elements Outdoor - - -
OPT-FTN-ST Outdoor Curtain PIR 2m or 5m (switchable lens) - Outdoor - - -
OPT-SL-200QN Photoelectric Beam 60m (200ft) Quad beam IP65 - - -
OPT-SL-650QN Photoelectric Beam 200m (650ft) Quad beam IP65 - - -

For full model-specific specifications including wiring diagrams and dimensional drawings, view our complete Optex Detectors range.

---

Choosing the Right Optex Detector for Your Application

Selecting the correct detector depends on three primary factors: environment (indoor vs. outdoor), required detection technology (PIR, dual-tech, or photoelectric), and compliance grade. For standard residential and light commercial indoor applications, the CX-702, RXC-ST, or FX-360/SX-360Z ceiling models cover most scenarios. Where false alarm immunity is critical - industrial sites, high-traffic areas, or locations with HVAC - the FMX-DT-X5 or CDX-DAM-X5 dual-tech models are the appropriate choice. For outdoor perimeter protection, the LX-402 and WXI-ST handle most residential and commercial boundary applications, while the BXS-ST and FTN-ST address specific curtain detection needs at entry points. Long-range perimeter protection across open boundaries is best served by the SL-200QN or SL-650QN photoelectric beam detectors.

For guidance on selecting the right detector for your specific installation, or to discuss volume pricing for installer accounts, browse the full Optex Detectors range at Essential Security Supplies NZ. You can also explore our Optex Outdoor Detectors and Optex Outdoor Beam Detectors collections for a filtered view of the range. For further technical reference, the New Zealand Security Association (NZSA) publishes installation standards and best practice guidance relevant to detector selection and placement in NZ security systems.